Code: 09-700-00
Description: Toner Supply Error
Causes: Inadequate toner supply to the Drum Cartridge.
Remedy: • Check the Toner Cartridge for seal tape. • Cycle system power.
Check the Toner Cartridge. The Toner Cartridge is installed correctly and the seal tape is removed. Y↓ N→Remove seal tape if present, then gently agitate the Toner Cartridge and install. Remove the Right Cover and check the Top Door linkage. The linkage is connected and operates freely when the Top Door is raised and lowered. Y↓ N→Repair the Top Door linkage. Test the toner motor in the Main Drive Assembly. The motor rotates. Y↓ N→Reseat CN9 on the MCU Board, then retest the toner motor. The motor rotates. Y↓ N→Replace the Main Drive Assembly. Reassemble and perform SCP 6 Final Actions. Check all connections between the MCU Board and Main Drive Assembly. The harnesses are connected and undamaged. Y↓ N→Repair or reconnect the harness. Replace these components in order until the error is corrected. 1. Toner Cartridge 2. Main Drive Assembly, PL 4.10 Item 1 3. MCU Board, PL 3.10 Item 3
Check the Toner Cartridge. The Toner Cartridge is installed correctly and the seal tape is removed. Y↓ N→Remove seal tape if present, then gently agitate the Toner Cartridge and install. Remove the Right Cover and check the Top Door linkage. The linkage is connected and operates freely when the Top Door is raised and lowered. Y↓ N→Repair the Top Door linkage. Test the toner motor in the Main Drive Assembly. The motor rotates. Y↓ N→Reseat CN9 on the MCU Board, then retest the toner motor. The motor rotates. Y↓ N→Replace the Main Drive Assembly. Reassemble and perform SCP 6 Final Actions. Check all connections between the MCU Board and Main Drive Assembly. The harnesses are connected and undamaged. Y↓ N→Repair or reconnect the harness. Replace these components in order until the error is corrected. 1. Toner Cartridge 2. Main Drive Assembly, PL 4.10 Item 1 3. MCU Board, PL 3.10 Item 3