Code: 12-610-00, 12-855-00
Description: Out of Staples
Causes: 12-610-00 The Stapler Cartridge is empty as indicated by the Stapler self priming sensor. 12-855-00 The Stapler is not properly primed with staples as reported by the self priming sensor.
Remedy: • Reseat the Staple Cartridge. • Replace the Staple Cartridge.
NOTE: Remove the Stacker Shield Assembly to access the Stapler harness. Cycle system power. The error message is displayed. Y↓ N→Perform SCP 6 Final Actions. Select dC330 code 12-855 to test the self priming sensor. The sensor signal changes as the staple cartridge is installed or removed. Y↓ N→Remove the Finisher, GP 14 to check the condition of the Finisher option connector and harness. The connector and harness are undamaged. Y↓ N→Replace the sensor or repair the harness. Check Stapler harness connections. The sensor is connected and the harness undamaged. Y↓ N→Repair or reconnect the harness. Replace the Stapler. The error message is displayed. Y↓ N→Reassembly and perform SCP 6 Final Actions. Replace the Finisher Control Board. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3
NOTE: Remove the Stacker Shield Assembly to access the Stapler harness. Cycle system power. The error message is displayed. Y↓ N→Perform SCP 6 Final Actions. Select dC330 code 12-855 to test the self priming sensor. The sensor signal changes as the staple cartridge is installed or removed. Y↓ N→Remove the Finisher, GP 14 to check the condition of the Finisher option connector and harness. The connector and harness are undamaged. Y↓ N→Replace the sensor or repair the harness. Check Stapler harness connections. The sensor is connected and the harness undamaged. Y↓ N→Repair or reconnect the harness. Replace the Stapler. The error message is displayed. Y↓ N→Reassembly and perform SCP 6 Final Actions. Replace the Finisher Control Board. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3