Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 12-870-00 — Xerox Phaser 4600

Code: 12-870-00

Description: Stapler Safety Not Detected
Causes: The Stapler Interlock Switch is open.
Remedy: • Check the Staple Cartridge Door • Check for obstructions blocking the switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Check the Staple Cartridge Door interlock actuator. The actuator is undamaged. Y↓ N→Repair or replace the Finisher right cover. Remove the Finisher Right Cover and check the Interlock Switch (PL 12.45 Item 4). The switch is undamaged and the connections are secure. Y↓ N→Connect, repair, or replace the switch. Select dC330 code 12-890 to test the Stapler Cartridge Door Interlock Switch. The switch signal changes (open/closed). Y↓ N→Replace the switch. Check the Finisher option harness in the Finisher right cover. The harness is undamaged. Y↓ N→Repair the harness. Replace these components in order until the error is corrected. 1. Staple Cartridge Door Interlock Switch, PL 12.45 Item 4 2. Finisher Control Board, PL 12.15 Item 2 3. IOT Upper Option Harness, PL 10.30 Item 24 4. MCU Board, PL 3.10 Item 3

← Xem tất cả mã lỗi Xerox Phaser 4600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie