Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 12-911-00, 12-921-00, 12-931-00, 12-941-00 — Xerox Phaser 4600

Code: 12-911-00, 12-921-00, 12-931-00, 12-941-00

Description: Mailbox Bin Jam
Causes: 12-911-00 Mailbox Bin 1 jam to exit. 12-921-00 Mailbox Bin 2 jam to exit. 12-931-00 Mailbox Bin 3 jam to exit. 12-941-00 Mailbox Bin 4 jam to exit.
Remedy: • Open the Mailbox Rear Door and check the media path. • Check the exit actuator of the affected output tray. • Reseat the Mailbox on the IOT.
NOTE: Bins (output trays) are numbered 1 through 4, with 4 being the top tray. Check the condition of the exit actuator. The actuator moves freely and is undamaged. Y↓ N→Clean or repair the affected actuator. Select dC330 code 12-911 (1), 12-921 (2), 12-931 (3), or 12-941 (4) to test the bin empty sensor of the affected output tray. The sensor signal changes (high/low). Y↓ N→Remove the Mailbox, GP 14 to check the condition of the Mailbox option connector and harness. The connector and harness are undamaged. Y↓ N→Repair the harness. Remove the Mailbox right cover and reseat P/J5 on the Mailbox Control Board. The error message is displayed. Y↓ N→Reassembly and perform SCP 6 Final Actions. Replace the Mailbox Control Board. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3

← Xem tất cả mã lỗi Xerox Phaser 4600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie