Code: 12-925-00, 12-935-00
Description: Upper Diverter Fault Home
Causes: 12-925-00 The Mailbox upper diverter did not move from home position. 12-935-00 The Mailbox upper diverter did not move to home position.
Remedy: • Open, then close the Mailbox Rear Door. • Cycle system power.
Cycle system power. The error message is displayed. Y↓ N→Complete. Select dC330 code 12-925 to test the upper diverter home position sensor. The sensor signal changes (high/low). Y↓ N→Remove the Mailbox, GP 14 to check the condition of the Mailbox option connector and harness. The connector and harness are undamaged. Y↓ N→Repair the harness. Remove the Mailbox right cover and reseat P/J3 on the Mailbox Control Board. The error message is displayed. Y↓ N→Reassembly and perform SCP 6 Final Actions. Replace the Mailbox Control Board. Select dC330 code 12-935 to test the Mailbox Upper Diverter Drive Assembly, PL 11.25 Item 1. The motor rotates (on/off). Y↓ N→Check the Upper Diverter Drive Assembly connections and harness . Repair or reconnect as necessary. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Select dC330 code 12-925 to test the upper diverter home position sensor. The sensor signal changes (high/low). Y↓ N→Remove the Mailbox, GP 14 to check the condition of the Mailbox option connector and harness. The connector and harness are undamaged. Y↓ N→Repair the harness. Remove the Mailbox right cover and reseat P/J3 on the Mailbox Control Board. The error message is displayed. Y↓ N→Reassembly and perform SCP 6 Final Actions. Replace the Mailbox Control Board. Select dC330 code 12-935 to test the Mailbox Upper Diverter Drive Assembly, PL 11.25 Item 1. The motor rotates (on/off). Y↓ N→Check the Upper Diverter Drive Assembly connections and harness . Repair or reconnect as necessary. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3