Code: 03-430-00
Description: Tray 4 Paper Mismatch
Causes: Media size setting for Tray 4 differ from those reported by the Size Switch.
Remedy: • Check media size settings for the tray from the Control Panel. • Reset the tray side and rear guides. • Check for obstructions blocking the Size Switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Inspect the Tray 4 end guide. The end guide operates the Size Switch actuators. Y↓ N→Replace the Tray, Select dC330 codes 07-420, 07-430, 07-440. The switches are operational (high/low). Y↓ N→Replace the Size Switch. Remove the IOT and Tray 3 from the Feeder. Check the Tray 4 Upper Option Harness. The harness is undamaged. Y↓ N→Replace the Upper Option Harness. Check option harness continuity through Trays 3 and 4. The connectors are undamaged. Y↓ N→Replace damaged connectors. Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. Tray, PL 7.10 Item 23 3. Feeder Board, PL 8.30 Item 7 4. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Inspect the Tray 4 end guide. The end guide operates the Size Switch actuators. Y↓ N→Replace the Tray, Select dC330 codes 07-420, 07-430, 07-440. The switches are operational (high/low). Y↓ N→Replace the Size Switch. Remove the IOT and Tray 3 from the Feeder. Check the Tray 4 Upper Option Harness. The harness is undamaged. Y↓ N→Replace the Upper Option Harness. Check option harness continuity through Trays 3 and 4. The connectors are undamaged. Y↓ N→Replace damaged connectors. Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. Tray, PL 7.10 Item 23 3. Feeder Board, PL 8.30 Item 7 4. MCU Board, PL 3.10 Item 3