Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 03-470-00 — Xerox Phaser 4620

Code: 03-470-00

Description: Tray 6 Paper Mismatch
Causes: Media size setting for Tray 6 differ from those reported by the Size Switch.
Remedy: • Check media size settings for the tray from the Control Panel. • Reset the tray side and rear guides. • Check for obstructions blocking the Size Switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Inspect the Tray 6 end guide. The end guide operates the Size Switch actuators. Y↓ N→Replace the Tray, Select dC330 codes 07-620, 07-630, 07-640. The switches are operational (high/low). Y↓ N→Replace the Size Switch. Remove the IOT, Tray 3, 4 and 5 from the Feeder. Check the Tray 6 Upper Option Harness. The harness is undamaged. Y↓ N→Replace the Upper Option Harness. Check option harness continuity through all trays. The harnesses are undamaged. Y↓ N→Replace damaged harnesses. Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace these components in order until the error is corrected. 1. Size Switch, PL 3.10 Item 9 2. Tray, PL 7.10 Item 23 3. Feeder Board, PL 8.30 Item 7 4. MCU Board, PL 3.10 Item 3

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie