Code: 03-480-00
Description: HCF Paper Mismatch
Causes: Media size setting for the HCF differs from those reported by the Size Switch. NOTE: Optional Tray numbering varies by configuration. When testing HCF components, use the dC330 codes appropriate for the HCF’s position. For example, if the configuration is 5 trays and the 5th tray is the HCF, use Tray 5 control codes.
Remedy: • Check media size settings for the HCF from the Control Panel. • Check for obstructions blocking the media guide.
Cycle system power. The error message is displayed. Y↓ N→Complete. Remove media and check operation of the length guide. The media guide moves smoothly. Y↓ N→Clear obstructions blocking guide movement. Select dC330 codes dependent on HCF position. The switches are operational (high/low). Y↓ N→Remove the IOT, Tray 3, and Tray 4 from the HCF. Check the HCF Option Harness. The harness is undamaged. Y↓ N→Replace the HCF Option Harness. Check option harness continuity through all trays. The harnesses are undamaged. Y↓ N→Replace damaged connectors. Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace the Size Switch, PL 7.25 Item 5. Replace these components in order until the error is corrected. 1. Size Switch, PL 7.25 Item 5 2. HCF Option Connector, PL 7.25 Item 15 3. Control Board, PL 7.25 Item 18 4. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Remove media and check operation of the length guide. The media guide moves smoothly. Y↓ N→Clear obstructions blocking guide movement. Select dC330 codes dependent on HCF position. The switches are operational (high/low). Y↓ N→Remove the IOT, Tray 3, and Tray 4 from the HCF. Check the HCF Option Harness. The harness is undamaged. Y↓ N→Replace the HCF Option Harness. Check option harness continuity through all trays. The harnesses are undamaged. Y↓ N→Replace damaged connectors. Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace the Size Switch, PL 7.25 Item 5. Replace these components in order until the error is corrected. 1. Size Switch, PL 7.25 Item 5 2. HCF Option Connector, PL 7.25 Item 15 3. Control Board, PL 7.25 Item 18 4. MCU Board, PL 3.10 Item 3