Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 04-400-00 — Xerox Phaser 4620

Code: 04-400-00

Description: Tray 5 Lift Error
Causes: Tray 5 Level Sensor did not change state within 13 seconds of Lift Motor activation.
Remedy: • Remove and replace Tray 5. • Check for obstructions blocking bottom plate movement. • Reorder Feeder position to isolate the problem.
Cycle system power. The error message is displayed. Y↓ N→Complete. Check Tray 5 bottom plate linkage and sector gear condition. Use an alternate Tray to test lift operation.The Tray is undamaged. Y↓ N→Replace the Tray. Check the Pick Assembly (PL 8.20) motion. Pick assembly motion is good. Y↓ N→Repair improper Pick Assembly motion. Select dC330 code 07-550. The sensor is operational (high/low). Y↓ N→Repair or replace the Level Sensor. Check the Lift Gear, PL 8.35 Item 4. The gear is undamaged and properly installed. Y↓ N→Replace the Lift Gear. Remove the IOT, Tray 3 and Tray 4 from the Feeder. Reassemble the system to exchange Feeder positions. The error message changes to the new feeder position. Y↓ N→Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace the MCU Board. Test Lift Motor operation in the affected Feeder. The Lift Motor rotates. Y↓ N→Remove the Right Cover , reseat CN2 on the Feeder Board, then retest. The Lift Motor rotates. Y↓ N→Check the Feeder Upper Option Harness. The harness is undamaged. Y↓ N→Repair or replace the harness. Replace the Lift Motor, then retest. The Lift Motor rotates. Y↓ N→Replace the Feeder Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Tray, PL 7.10 Item 23 2. Feeder Board, PL 8.30 Item 7 3. MCU Board, PL 3.10 Item 3

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie