Code: 04-500-00
Description: Main Motor Failure
Causes: An error occurred in the Main Drive Assembly.
Remedy: • Close the Top Door. • Check for obstructions blocking the latch.
Cover the Drum Cartridge to prevent light exposure. Cycle system power. The error message is displayed. Y↓ N→Perform SCP 6 Final Actions. Select dC330 code 04-100. All motors rotate. Y↓ N→Remove the Right Cover , reseat CN5 and CN9 on the MCU Board, then retest. All motors rotate. Y↓ N→Manually rotate the motors. The motors turn freely. Y↓ N→Remove the Toner and Drum Cartridges and manually rotate the motors. The motors turn freely. Y↓ N→Replace the Main Drive Assembly, Replace the affected cartridge. Check the Main Drive Assembly harnesses. The harnesses are undamaged. Y↓ N→Repair the harness. Replace the Main Drive Assembly, then retest. All motors rotate. Y↓ N→Replace the MCU Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. MCU Board, PL 3.10 Item 3 2. HVPS, PL 1.10 Item 1 Y↓ N→Replace the Lower Option Harness. Remove the Right Cover (), reseat CN2 on the Control Board and CN1, CN2 on the Jumper Board, then retest. The Lift Motor rotates. Y↓ N→Replace the Lift Motor, (), then retest. The Lift Motor rotates. Y↓ N→Replace the Control Board, (). Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Feeder Assembly, PL 8.25 Item 16 2. Control Board, PL 7.25 Item 18 3. MCU Board, PL 3.10 Item 3
Cover the Drum Cartridge to prevent light exposure. Cycle system power. The error message is displayed. Y↓ N→Perform SCP 6 Final Actions. Select dC330 code 04-100. All motors rotate. Y↓ N→Remove the Right Cover , reseat CN5 and CN9 on the MCU Board, then retest. All motors rotate. Y↓ N→Manually rotate the motors. The motors turn freely. Y↓ N→Remove the Toner and Drum Cartridges and manually rotate the motors. The motors turn freely. Y↓ N→Replace the Main Drive Assembly, Replace the affected cartridge. Check the Main Drive Assembly harnesses. The harnesses are undamaged. Y↓ N→Repair the harness. Replace the Main Drive Assembly, then retest. All motors rotate. Y↓ N→Replace the MCU Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. MCU Board, PL 3.10 Item 3 2. HVPS, PL 1.10 Item 1 Y↓ N→Replace the Lower Option Harness. Remove the Right Cover (), reseat CN2 on the Control Board and CN1, CN2 on the Jumper Board, then retest. The Lift Motor rotates. Y↓ N→Replace the Lift Motor, (), then retest. The Lift Motor rotates. Y↓ N→Replace the Control Board, (). Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Feeder Assembly, PL 8.25 Item 16 2. Control Board, PL 7.25 Item 18 3. MCU Board, PL 3.10 Item 3