Code: 07-110-00
Description: Paper Empty at Tray 2
Causes: The Tray 2 No Paper indicates the Tray is empty.
Remedy: 1. Add media to the Tray. 2. Check the No Paper Sensor Actuator. 3. Check for obstruction of the Pick mechanism.
Check the Tray 2 No Paper Sensor Actuator. The actuator is undamaged and motion is good. Y↓ N→Repair or replace the Tray 2 No Paper Sensor Actuator. Select dC330 code 07-210 to test the sensor. The sensor signal changes (high/low). Y↓ N→Replace the Tray 2 No Paper Sensor (PL 8.15 Item 19), then retest. The sensor signal changes. Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The sensor signal changes. Y↓ N→Replace the MCU Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions.
Check the Tray 2 No Paper Sensor Actuator. The actuator is undamaged and motion is good. Y↓ N→Repair or replace the Tray 2 No Paper Sensor Actuator. Select dC330 code 07-210 to test the sensor. The sensor signal changes (high/low). Y↓ N→Replace the Tray 2 No Paper Sensor (PL 8.15 Item 19), then retest. The sensor signal changes. Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The sensor signal changes. Y↓ N→Replace the MCU Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions.