Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 07-310-00 — Xerox Phaser 4620

Code: 07-310-00

Description: Paper Empty at Tray 4
Causes: The Tray 4 No Paper Sensor indicates Tray 4 is empty.
Remedy: 1. Check the No Paper Sensor Actuator. 2. Check for obstruction of the Pick mechanism.
Check the No Paper Sensor Actuator. The actuator is undamaged and motion is good. Y↓ N→Repair or replace the Tray 4 No Paper Sensor Actuator. Select dC330 code 07-410 to test the sensor. The sensor signal changes (high/low). Y↓ N→Remove the IOT and Tray 3. Check the option harness connections. The harness connectors are undamaged. Y↓ N→Replace any damaged harnesses. Reassemble the system to exchange Feeder positions. The error changes to the new feeder position. Y↓ N→Check the IOT Lower Option Harness. The harness is undamaged. Y↓ N→Replace the Lower Option Harness. Replace the MCU Board. Replace the No Paper Sensor , then retest. The signal changes. Y↓ N→Remove the Right Cover and reseat CN3 on the Feeder Board, then retest. The sensor signal changes. Y↓ N→Replace the Feeder Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie