Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 07-330-00, 07-331-00 — Xerox Phaser 4620

Code: 07-330-00, 07-331-00

Description: Jam in Tray 4
Causes: 07-330-00 Jam 0 in Tray 4. Media remains in the Tray 4 Pick-up Assembly. 07-331-00 Check Tray 4 Feed Area. Media remains at the Tray 4 Take Away Sensor.
Remedy: 1. Check for obstructions in the media path.
Check the Nudger, Feed, and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the rollers. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Check Tray 3 Pick Assembly (PL 8.20 Item 17) motion. Pick assembly motion is good. Y↓ N→Repair improper pick assembly motion. Select dC330 code 08-840 to test the Feed Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN9 on the Feeder Board, then retest. The clutch is engaged. Y↓ N→Replace the Feed Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-940 to test the Feed Drive. The Feed Drive Assembly rotates (on/ off). Y↓ N→Remove the Right Cover and reseat CN7 on the Feeder Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Feed Assembly, PL 8.40 Item 10

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie