Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 07-500-00 — Xerox Phaser 4620

Code: 07-500-00

Description: Paper Empty in Tray 1
Causes: The Tray 1 No Paper Sensor indicates Tray 1 is empty.
Remedy: 1. Add media to the Tray. 2. Check the No Paper Sensor Actuator.
Check the Tray 1 No Paper Sensor Actuator. The actuator is undamaged and motion is good. Y↓ N→Repair or replace the Tray 1 No Paper Sensor Actuator. Select dC330 code 07-110 to test the sensor. The sensor signal changes (high/low). Y↓ N→Replace the Tray 1 No Paper Sensor , then retest. The sensor signal changes. Y↓ N→Remove the Right Cover and reseat CN13 on the MCU Board, then retest. The sensor signal changes. Y↓ N→Replace the MCU Board. Reassemble and perform SCP 6 Final Actions. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie