Code: 07-530-00
Description: Jam 0 in Tray 1
Causes: Media remains in the Tray 1 Feeder.
Remedy: 1. Check media condition. 2. Check for obstructions in the media path.
Check the Feed and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the rollers. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Select dC330 code 08-810 to test the Tray 1 Feed Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN13 on the MCU Board, then retest. The clutch is engaged. Y↓ N→Replace the Feed Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-920 to test the Feed Drive. The Feed Drive Assembly rotates (on/ off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.
Check the Feed and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the rollers. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Select dC330 code 08-810 to test the Tray 1 Feed Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN13 on the MCU Board, then retest. The clutch is engaged. Y↓ N→Replace the Feed Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-920 to test the Feed Drive. The Feed Drive Assembly rotates (on/ off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.