Code: 07-531-00, 07-630-00
Description: Jam in Tray 6
Causes: 07-531-00 Check Tray 6 Feed Area. Media remains in the Tray 6 Take Away Sensor. 07-630-00 Jam 0 in Tray 6. Media remains at the Tray 6 Pick-up Assembly.
Remedy: 1. Check for obstructions in the media path.
Check the Nudger, Feed, and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the rollers. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Check Tray 6 Pick Assembly (PL 8.20 Item 17) motion. Pick assembly motion is good. Y↓ N→Repair improper pick assembly motion. Select dC330 code 08-856 to test the Tray 6 Feed Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN9 on the Feeder Board, then retest. The clutch is engaged. Y↓ N→Replace the Feed Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-960 to test the Feed Drive. The Feed Drive Assembly rotates (on/ off). Y↓ N→Remove the Right Cover and reseat CN7 on the Feeder Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Feed Assembly, PL 8.40 Item 10
Check the Nudger, Feed, and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the rollers. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Check Tray 6 Pick Assembly (PL 8.20 Item 17) motion. Pick assembly motion is good. Y↓ N→Repair improper pick assembly motion. Select dC330 code 08-856 to test the Tray 6 Feed Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN9 on the Feeder Board, then retest. The clutch is engaged. Y↓ N→Replace the Feed Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-960 to test the Feed Drive. The Feed Drive Assembly rotates (on/ off). Y↓ N→Remove the Right Cover and reseat CN7 on the Feeder Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Feed Assembly, PL 8.40 Item 10