Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 08-100-00 — Xerox Phaser 4620

Code: 08-100-00

Description: Jam 1 in Registration
Causes: Media remains in the Registration Rollers.
Remedy: • Check the media. • Check Toner and Drum Cartridge installation. • Check for obstructions blocking the media path.
Check the Registration Rollers for excessive wear, poor spring tension or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the Registration Roller Assembly. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Select dC330 code 08-850 to test the Registration Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN5 and P/J36, then retest. The clutch is engaged. Y↓ N→Replace the Registration Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-920 to test the Feed Drive. The Feed Drive Assembly rotates (on/ off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Registration Roller Assembly, PL 8.45 Item 12 2. Registration Clutch, PL 4.10 Item 7

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie