Code: 08-200-00
Description: Jam in Tray 2
Causes: Media remains in the Tray 2 Pick-up Assembly.
Remedy: 1. Check media condition. 2. Check for obstructions in the media path.
Check the Nudger, Feed and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the rollers. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Select dC330 code 08-100 to test the Take Away Sensor. The sensor signal changes (high/ low). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The sensor signal changes. Y↓ N→Replace the sensor. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-820 to test the Feed Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The clutch is engaged. Y↓ N→Replace the Feed Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-920 to test the Feed Drive Assembly. The Feed Drive Assembly rotates (on/off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.
Check the Nudger, Feed and Separator Rollers for excessive wear or contamination. The rollers are undamaged and clean. Y↓ N→Clean or replace the rollers. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Select dC330 code 08-100 to test the Take Away Sensor. The sensor signal changes (high/ low). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The sensor signal changes. Y↓ N→Replace the sensor. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-820 to test the Feed Clutch. The clutch is engaged (on/off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The clutch is engaged. Y↓ N→Replace the Feed Clutch. Reassemble and perform SCP 6 Final Actions. Select dC330 code 08-920 to test the Feed Drive Assembly. The Feed Drive Assembly rotates (on/off). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The Feed Drive Assembly rotates. Y↓ N→Replace the Feed Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.