Code: 08-610-00
Description: Jam 1 in Duplex Unit
Causes: Media jam at the front of the Duplex Unit.
Remedy: 1. Check media condition. 2. Check the position of the Duplex Unit media size switch.
Check the Duplex Unit transport components for damage or excessive wear. The rollers are undamaged and clean. Y↓ N→Clean or replace the Duplex Unit, PL 10.25 Item 26. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Check the condition of the Duplex Unit Timing Belt, PL 10.25 Item 11. The belt is undamaged. Y↓ N→Replace the Timing Belt. Select dC330 code 08-700 to test the Duplex Feed Sensor. The sensor signal changes (high/low). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The sensor signal changes. Y↓ N→Replace the sensor, PL 8.15 Item 19. Reassemble and perform SCP 6 Final Actions. Select dC330 code 04-230 to test the Duplex Drive Assembly. The Duplex Drive Assembly rotates in both directions. Y↓ N→Remove the Right Cover and reseat CN11 on the MCU Board, then retest. The Duplex Drive Assembly rotates. Y↓ N→Replace the Duplex Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.
Check the Duplex Unit transport components for damage or excessive wear. The rollers are undamaged and clean. Y↓ N→Clean or replace the Duplex Unit, PL 10.25 Item 26. Check for obstructions or debris in the media path. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Check the condition of the Duplex Unit Timing Belt, PL 10.25 Item 11. The belt is undamaged. Y↓ N→Replace the Timing Belt. Select dC330 code 08-700 to test the Duplex Feed Sensor. The sensor signal changes (high/low). Y↓ N→Remove the Right Cover and reseat CN12 on the MCU Board, then retest. The sensor signal changes. Y↓ N→Replace the sensor, PL 8.15 Item 19. Reassemble and perform SCP 6 Final Actions. Select dC330 code 04-230 to test the Duplex Drive Assembly. The Duplex Drive Assembly rotates in both directions. Y↓ N→Remove the Right Cover and reseat CN11 on the MCU Board, then retest. The Duplex Drive Assembly rotates. Y↓ N→Replace the Duplex Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace the MCU Board.