Code: 09-003-00
Description: Developer Motor Failure
Causes: A drum motor error occurred in the Main Drive Assembly.
Remedy: • Check the Drum Cartridge • Cycle system power
Cycle system power. The error message is displayed. Y↓ N→Complete. Check for obstructions or debris in the media path blocking drum rotation. Remove the Drum Cartridge and clear any debris. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Select dC330 code 04-181 to test the drum motor. The motor rotates (on/off). Y↓ N→Remove the Right Cover and reseat CN5 on the MCU Board, then retest. The motor rotates. Y↓ N→Replace the Main Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Drum Cartridge, PL 9.10 Item 1 2. Main Drive Assembly, PL 4.10 Item 1 3. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Check for obstructions or debris in the media path blocking drum rotation. Remove the Drum Cartridge and clear any debris. The media path is clear. Y↓ N→Clear the media path of obstructions or debris. Select dC330 code 04-181 to test the drum motor. The motor rotates (on/off). Y↓ N→Remove the Right Cover and reseat CN5 on the MCU Board, then retest. The motor rotates. Y↓ N→Replace the Main Drive Assembly. Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Drum Cartridge, PL 9.10 Item 1 2. Main Drive Assembly, PL 4.10 Item 1 3. MCU Board, PL 3.10 Item 3