Code: 09-590-00
Description: Waste Toner Cartridge Not Installed
Causes: The Waste Toner Cartridge Detect Sensor indicates the Waste Toner Cartridge is not installed.
Remedy: • Check the actuator on the Waste Toner Cartridge Door.
Check the condition of the actuator on the Waste Toner Cartridge Door. The actuator is undamaged. Y↓ N→Repair or replace the waste toner cartridge cover, PL 28.10 Item 2 Check the function of the waste toner port on the Waste Toner Cartridge. The port cover opens when actuated. Y↓ N→Repair of replace the Waste Toner Cartridge. Remove the Left Cover and check sensor harness connections and condition. The harness is clean, connected and undamaged. Y↓ N→Repair or reconnect the harness. Remove the Right Cover and reseat CN2 on the MCU Board. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Waste Toner Cartridge Detect Sensor, PL 9.15 Item 6 2. Joint Board, PL 9.15 Item 7 3. MCU Board, PL 3.10 Item 3
Check the condition of the actuator on the Waste Toner Cartridge Door. The actuator is undamaged. Y↓ N→Repair or replace the waste toner cartridge cover, PL 28.10 Item 2 Check the function of the waste toner port on the Waste Toner Cartridge. The port cover opens when actuated. Y↓ N→Repair of replace the Waste Toner Cartridge. Remove the Left Cover and check sensor harness connections and condition. The harness is clean, connected and undamaged. Y↓ N→Repair or reconnect the harness. Remove the Right Cover and reseat CN2 on the MCU Board. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Waste Toner Cartridge Detect Sensor, PL 9.15 Item 6 2. Joint Board, PL 9.15 Item 7 3. MCU Board, PL 3.10 Item 3