Causes: An error occurred in the Waste Toner Cartridge Full Sensor.
Remedy: • Cycle system power. • Check for dust covering the sensor window on the cartridge. Cycle system power. The error message is displayed. Y↓ N→Perform SCP 6 Final Actions. Remove the Left Cover and check sensor harness connections and condition. The harness is clean, connected and undamaged. Y↓ N→Repair or reconnect the harness. Remove the Right Cover and reseat CN2 on the MCU Board. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace these components in order until the error is corrected. 1. Waste Toner Full Sensor, PL 9.15 Item 5 2. Joint Board, PL 9.15 Item 7 3. MCU Board, PL 3.10 Item 3