Code: 09-920-00
Description: Transfer Unit Error
Causes: The Transfer Roller high voltage contact point is not connected or is dirty.
Remedy: • Reseat the Transfer Roller. • Clean the high voltage contact.
Remove the Transfer Roller and inspect the high voltage contact point. The contact is clean and undamaged. Y↓ N→Replace the Transfer Roller. Select dC330 codes 09-300 and 09-310 to check Transfer Roller bias voltage. The reading is within the operating range. Y↓ N→Remove the Left Cover and check the high voltage connection to the HVPS. The harness is clean, connected and undamaged. Y↓ N→Repair or connect the harness. Replace the HVPS. Replace these components in order until the error is corrected. 1. Transfer Roller, PL 9.10 Item 2 2. HVPS, PL 1.10 Item 1
Remove the Transfer Roller and inspect the high voltage contact point. The contact is clean and undamaged. Y↓ N→Replace the Transfer Roller. Select dC330 codes 09-300 and 09-310 to check Transfer Roller bias voltage. The reading is within the operating range. Y↓ N→Remove the Left Cover and check the high voltage connection to the HVPS. The harness is clean, connected and undamaged. Y↓ N→Repair or connect the harness. Replace the HVPS. Replace these components in order until the error is corrected. 1. Transfer Roller, PL 9.10 Item 2 2. HVPS, PL 1.10 Item 1