Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10-308-00 — Xerox Phaser 4620

Code: 10-308-00

Description: Fuser Motor Error
Causes: The Fuser Drive Assembly failed to rotate.
Remedy: • Check Fuser Heat Roller movement. • Check for obstructions in the Fuser.
Remove the Fuser and manually rotate the Heat Roller using the Fuser Gear. The Heat Roller rotates. Y↓ N→Clear the obstruction or repair the damage preventing Heat Roller rotation. Replace Fuser components as needed to restore proper operation: • Heat Roller and Bearings, PL 10.11 Item 12 • Pressure Roller and Bearings, PL 10.11 Item 3 • Fuser Gear, PL 10.11 Item 14 • Fuser, PL 10.10 Item 1 Open the Rear Door and manually rotate the Fuser Drive Assembly. The Fuser Drive Assembly rotates. Y↓ N→Replace the Fuser Drive Assembly. Select dC330 code 10-400 to test the Fuser Drive Assembly. The Fuser Drive Assembly rotates. Y↓ N→Remove the Right Cover and reseat CN5 on the MCU Board. The error message is displayed. Y↓ N→Reassemble and perform SCP 6 Final Actions. Replace the Fuser Drive Assembly. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie