Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 12-300-00, 12-488-00, 12-489-00 — Xerox Phaser 4620

Code: 12-300-00, 12-488-00, 12-489-00

Description: Jam in Finisher Exit
Causes: 12-300-00 Media jam at Finisher exit. 12-488-00 Media did not clear the Finisher exit sensor. 12-489-00 Media did not reach the Finisher exit sensor on time.
Remedy: • Check the exit sensor and actuator. • Check for obstructions blocking the media path.
NOTE: Remove the Finisher top cover to access the sensor and actuator. Use to access the transport motor. Check the condition of the Finisher feed rollers. The feed rollers are clean and rotate freely. Y↓ N→Clean or repair the affected feed rollers. Select dC330 code 12-805 to test the Finisher exit sensor. The sensor signal changes (high/low). Y↓ N→Remove the Finisher, GP 14 to check the condition of the Finisher option connector, sensor and harness. The sensor is connected and the harness undamaged. Y↓ N→Replace the sensor or repair the harness. Replace the Finisher Control Board. Select dC330 code 12-110 to test the Finisher Transport Motor, PL 12.40 Item 8. The motor rotates (on/off). Y↓ N→Check the Transport Motor connection and harness. Repair or reconnect as necessary. Check the Finisher option harness in the Finisher Right Cover. The harness is undamaged. Y↓ N→Repair the harness. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie