Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 12-605-00 — Xerox Phaser 4620

Code: 12-605-00

Description: Staples Low
Causes: The Staple Cartridge is near empty as indicated by the low staple sensor in the Stapler.
Remedy: • Reseat the Staple Cartridge. • Replace the Staple Cartridge.
NOTE: Remove the Stacker Shield Assembly to access the Stapler harness. Cycle system power. The error message is displayed. Y↓ N→Perform SCP 6 Final Actions. Select dC330 code 12-860 to test the low staple sensor. The sensor signal changes (high/ low) as the staple cartridge is installed or removed. Y↓ N→Remove the Finisher, GP 14 to check the condition of the Finisher option connector and harness. The connector and harness are undamaged. Y↓ N→Replace the sensor or repair the harness. Check Stapler harness connections. The sensor is connected and the harness undamaged. Y↓ N→Repair or reconnect the harness. Replace the Stapler. The error message is displayed. Y↓ N→Reassembly and perform SCP 6 Final Actions. Replace the Finisher Control Board. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie