Code: 12-760-00, 12-770-00
Description: Stacker Fault
Causes: 12-760-00 The Stacker Tray failed to reach home position. 12-770-00 The Stacker Tray failed to lower.
Remedy: • Open and close the Finisher Rear Door. • Check for obstructions blocking Stacker Tray movement.
Cycle system power. The error message is displayed. Y↓ N→Perform SCP 6 Final Actions. Select dC330 code 12-600 (down), 12-610 (up) to test the Stacker Drive Assembly. The Stacker Tray moves up and down. Y↓ N→Remove the Finisher, GP 14 to check the condition of the Finisher option connector and harness. The connector and harness are undamaged. Y↓ N→Repair the harness. Remove the Finisher right cover and check the stacker drive belt, PL 12.25 Item 10. The drive belt is undamaged. Y↓ N→Repair or replace the belt. Check harness connections for the Stacker Drive Assembly on the Finisher Control Board. The drive assembly is connected and the harness undamaged. Y↓ N→Repair or reconnect the harness. Replace the Stacker Drive Assembly. The error message is displayed. Y↓ N→Reassembly and perform SCP 6 Final Actions. Replace the Finisher Control Board. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Perform SCP 6 Final Actions. Select dC330 code 12-600 (down), 12-610 (up) to test the Stacker Drive Assembly. The Stacker Tray moves up and down. Y↓ N→Remove the Finisher, GP 14 to check the condition of the Finisher option connector and harness. The connector and harness are undamaged. Y↓ N→Repair the harness. Remove the Finisher right cover and check the stacker drive belt, PL 12.25 Item 10. The drive belt is undamaged. Y↓ N→Repair or replace the belt. Check harness connections for the Stacker Drive Assembly on the Finisher Control Board. The drive assembly is connected and the harness undamaged. Y↓ N→Repair or reconnect the harness. Replace the Stacker Drive Assembly. The error message is displayed. Y↓ N→Reassembly and perform SCP 6 Final Actions. Replace the Finisher Control Board. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3