Code: 12-870-00
Description: Stapler Safety Not Detected
Causes: The Stapler Interlock Switch is open.
Remedy: • Check the Staple Cartridge Door • Check for obstructions blocking the switch.
Cycle system power. The error message is displayed. Y↓ N→Complete. Check the Staple Cartridge Door interlock actuator. The actuator is undamaged. Y↓ N→Repair or replace the Finisher right cover. Remove the Finisher Right Cover and check the Interlock Switch (PL 12.45 Item 4). The switch is undamaged and the connections are secure. Y↓ N→Connect, repair, or replace the switch. Select dC330 code 12-890 to test the Stapler Cartridge Door Interlock Switch. The switch signal changes (open/closed). Y↓ N→Replace the switch. Check the Finisher option harness in the Finisher right cover. The harness is undamaged. Y↓ N→Repair the harness. Replace these components in order until the error is corrected. 1. Staple Cartridge Door Interlock Switch, PL 12.45 Item 4 2. Finisher Control Board, PL 12.15 Item 2 3. IOT Upper Option Harness, PL 10.30 Item 24 4. MCU Board, PL 3.10 Item 3
Cycle system power. The error message is displayed. Y↓ N→Complete. Check the Staple Cartridge Door interlock actuator. The actuator is undamaged. Y↓ N→Repair or replace the Finisher right cover. Remove the Finisher Right Cover and check the Interlock Switch (PL 12.45 Item 4). The switch is undamaged and the connections are secure. Y↓ N→Connect, repair, or replace the switch. Select dC330 code 12-890 to test the Stapler Cartridge Door Interlock Switch. The switch signal changes (open/closed). Y↓ N→Replace the switch. Check the Finisher option harness in the Finisher right cover. The harness is undamaged. Y↓ N→Repair the harness. Replace these components in order until the error is corrected. 1. Staple Cartridge Door Interlock Switch, PL 12.45 Item 4 2. Finisher Control Board, PL 12.15 Item 2 3. IOT Upper Option Harness, PL 10.30 Item 24 4. MCU Board, PL 3.10 Item 3