Code: 12-906-00, 12-907-00
Description: Jam in Mailbox Entrance
Causes: 12-906-00 Media did not reach the mailbox Entrance Sensor on time. Media remains in the IOT exit. 12-907-00 Media did not clear the Mailbox entrance sensor on time. 12-908-00 Media is blocking the Mailbox Entrance Sensor.
Remedy: • Check the Mailbox entrance sensor actuator. • Check for obstructions blocking the media path.
NOTE: Remove the Mailbox Rear Door and base plate (PL 11.10 Item 7) to access the entrance sensor and actuator. Check the condition of the Mailbox feed rollers. The feed rollers are clean and rotate freely. Y↓ N→Clean or repair the affected feed rollers. Select dC330 code 12-905 to test the Mailbox entrance sensor. The sensor signal changes (high/low). Y↓ N→Remove the Mailbox, GP 14 to check the condition of the Mailbox option connector, entrance sensor and harness. The sensor is connected and the harness undamaged. Y↓ N→Replace the sensor or repair the harness. Replace the Mailbox Control Board. Select dC330 code 12-120 to test the Mailbox Transport Motor, PL 11.20 Item 1. The motor rotates. Y↓ N→Check the Transport Motor connection and harness . Repair or reconnect as necessary. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3
NOTE: Remove the Mailbox Rear Door and base plate (PL 11.10 Item 7) to access the entrance sensor and actuator. Check the condition of the Mailbox feed rollers. The feed rollers are clean and rotate freely. Y↓ N→Clean or repair the affected feed rollers. Select dC330 code 12-905 to test the Mailbox entrance sensor. The sensor signal changes (high/low). Y↓ N→Remove the Mailbox, GP 14 to check the condition of the Mailbox option connector, entrance sensor and harness. The sensor is connected and the harness undamaged. Y↓ N→Replace the sensor or repair the harness. Replace the Mailbox Control Board. Select dC330 code 12-120 to test the Mailbox Transport Motor, PL 11.20 Item 1. The motor rotates. Y↓ N→Check the Transport Motor connection and harness . Repair or reconnect as necessary. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3