Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 12-945-00, 12-955-00 — Xerox Phaser 4620

Code: 12-945-00, 12-955-00

Description: Lower Diverter Fault Home
Causes: 12-945-00 The Mailbox lower diverter did not move from home position. 12-955-00 The Mailbox lower diverter did not move to home position.
Remedy: • Open, then close the Mailbox Rear Door. • Cycle system power
Cycle system power. The error message is displayed. Y↓ N→Complete. Select dC330 code 12-945 to test the lower diverter home position sensor. The sensor signal changes (high/low). Y↓ N→Remove the Mailbox, GP 14 to check the condition of the Mailbox option connector and harness. The connector and harness are undamaged. Y↓ N→Repair the harness. Remove the Mailbox right cover and reseat P/J3 on the Mailbox Control Board. The error message is displayed. Y↓ N→Reassembly and perform SCP 6 Final Actions. Replace the Mailbox Control Board. Select dC330 code 12-955 to test the Mailbox Lower Diverter Drive Assembly, PL 11.25 Item 1. The motor rotates. Y↓ N→Check the Lower Diverter Drive Assembly connection and harness . Repair or reconnect as necessary. Replace these components in order until the error is corrected. 1. IOT Upper Option Harness, PL 10.30 Item 24 2. MCU Board, PL 3.10 Item 3

← Xem tất cả mã lỗi Xerox Phaser 4620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie