Code: 061 370
Description: IOT ROS Motor Failure The sending interval of image data signals was longer than the specified value for the specified time after the Scanner Motor had started rotating. The sending interval of image data signals became longer than the specified value after the interval had reached the specified value. The voltage of the Laser Diode did not reach the specified value.
Causes: ROS ASSY (PL7.1.1) MCU PWB (PL11.1.3) ESS PWB (PL11.1.7)
Remedy: 1 Check the connection of the ROS ASSY Check the connections between ROS ASSY and MCU PWB, as well as between ROS ASSY and ESS PWB. Are P/J62, P/J61, P/J18, P/J17, P/J64 and P/J1 connected securely? Go to Step 2 Connect P/J62, P/J61, P/J18, P/J17, P/J64 and P/J1 securely 2 Check after the replacement of ROS ASSY Replace the ROS ASSY. Does an error occur? Go to Step 3 Procedure is complete 3 Check after the replacement of MCU PWB Replace the MCU PWB. Does an error occur? Replace the ESS PWB Procedure is complete