Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H5-4, H5-7, H5-8 — Xerox Phaser 5400

Code: H5-4, H5-7, H5-8

Description: Finisher Board Failure NVM/Comm/Type Error • Finisher Board Failure - H5-4 NVM R/W Error • Finisher Failure - H5-7 MCU-Finisher Comm Error • Incorrect Finisher Installed - H5-8 Finisher Type Error
Causes: • Finisher Main PWB • Engine Control Board
Remedy: 1 Check the Finisher installation. Are the interface cables connected correctly? Go to Step 2. Reconnect the cables and got to Step 2. 2 Does the error occur when the power is cycled? Go to Step 3. Problem solved. 3 Check Finisher Main PWB connections. Are P/J8300 and P416 connected? Go to Step 4. Connect all connectors. Go to Step 4. 4 Check continuity between the Finisher Main PWB and the Engine Control Board. 1. Disconnect P/J8300 and P/J416. 2. Check for continuity at the following: • P/J8300-11 <=> P/J416-1 • P/J8300-10 <=> P/J416-2 • P/J8300-9 <=> P/J416-3 • P/J8300-8 <=> P/J416-4 • P/J8300-7 <=> P/J416-5 • P/J8300-6 <=> P/J416-6 • P/J8300-4 <=> P/J416-7 • P/J8300-3 <=> P/J416-8 • P/J8300-2 <=> P/J416-9 • P/J8300-1 <=> P/J416-10 • P/J8300-4 <=> P/J416-11 Are these conductive? Go to Step 5. Repair the wiring. 5 Check for +24 V to the Finisher Main PWB. Is there Replace the Finisher Main PWB. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie