Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H5-91 — Xerox Phaser 5400

Code: H5-91

Description: Stapler Failure - H5-91 Staple Fail The Stapler Home Sensor state is not detected within the specified time after a Stapler Move Motor forward operation, or the Stapler Home Sensor is not turned ON within the specified time following a Stapler Move Motor reverse operation.
Causes: • Stapler Assembly • Staple Home Position Sensor • Staple Motor • Stapler Harness • Finisher Main PWB
Remedy: 1 Test the Stapler Assembly. Run the Service Diagnostics Staple Motor Forward and Reverse tests. Does the Stapler Motor rotate normally? Go to Step 5. Go to Step 2. 2 Check the Staple Motor Harness connections. Are P/J8357 and P/J8308 connected? Go to Step 4. Connect and go to Step 3. 3 Print a Test Print. Does the error still occur? Go to Step 4. Problem solved. 4 Check the Staple Motor Harness continuity. 1. Disconnect P/J8357 and P/J8308. 2. Check for continuity at the following: • P/J8357-1 <=> P/J8308-10 • P/J8357-2 <=> P/J8308-9 • P/J8357-3 <=> P/J8308-8 • P/J8357-4 <=> P/J8308-7 Are these conductive? Go to Step 9. Repair the Staple Motor Harness. 5 Test the Staple Head Home Sensor. Run the Service Diagnostics Staple Head Home Sensor test. Does the sensor state change when the staple gear is rotated? Replace the Finisher Main PWB. Go to Step 6. 6 Check the Staple Harness connections. Are P/J8356 and P/J8308 connected? Go to Step 8. Connect and go to Step 7. 7 Staple a Test Print. Does the error still occur? Go to Step 8. Problem solved. 8 Check Staple Harness continuity. 1. Disconnect P/J8356 and P/J8308. 2. Check for continuity at the following: • P/J8356-1 <=> P/J8308-15 • P/J8356-2 <=> P/J8308-14 • P/J8356-3 <=> P/J8308-13 • P/J8356-4 <=> P/J8308-12 • P/J8356-5 <=> P/J8308-11 Are these conductive? Go to Step 9. Repair the Staple Harness. 9 Replace the Stapler Assembly. Staple a Test Print. Does the error still occur? Go to Step 10. Problem solved. 10 Replace the Finisher Main PWB. Does the error still occur? Replace the Engine Control Board. Problem solved.

← Xem tất cả mã lỗi Xerox Phaser 5400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie