Code: H6-7
Description: Tray 6 Control Board Failure - H6-7 HFC Comm Failure A communications error occurred between Tray 6 and the Engine Control Board.
Causes: • Tray 6 PWB • Engine Control Board
Remedy: 1 Check the Tray 6 installation. Is Tray 6 installed correctly? Go to Step 2. Correct the installation. If problem persists, go to Step 2. 2 Cycle printer power. Does the error still occur? Go to Step 3. Problem solved. 3 Check the Tray 6 PWB connections. Are P/J800A, P/J800B, P/J800 and P/J414 connected? Go to Step 4. Connect and go to Step 4. 4 Check continuity between the Tray 6 PWB and Engine Control Board. Check for continuity at the following: • P/J800A <=> P/J415 • P/J800B <=> P/J415 • P/J800 <=> P/J414 Are these conductive? Go to Step 5. Repair the wiring. 5 Disconnect all the connectors connected to the Tray 6 PWB and reconnect them. Cycle printer power. Does the error still occur? Replace the Tray 6 PWB. Replace the Engine Control Board.