Code: H7-3, H7-4
Description: Tray 4-5 Control Board Failure - NVM A read/write error has occurred in the NVRAM located on the Tray 4-5 PWB. • Tray 4-5 Control Board Failure - H7-3 NVM Out-of-order • Tray 4-5 Control Board Failure - H7-4 NVM R/W Error
Causes: • Tray 4-5 PWB • Engine Control Board
Remedy: 1 Cycle the printer power. Does the error reoccur? Go to Step 3. Problem solved. 2 Check the Tray 4-5 PWB connection. Are P/J413 and P/J541 connected? Go to Step 3. Connect P/J413 and P/541. 3 Check continuity between the Tray 4-5 PWB and the Engine Control Board. 1. Disconnect P/J413 and P/J541. 2. Check for continuity at the following: • P/J413-A1 <=> P/J541-1 • P/J413-A2<=> P/J541-2 • P/J413-A3 <=> P/J541-3 • P/J413-A4 <=> P/J541-4 • P/J413-A5 <=> P/J541-5 • P/J413-A6 <=> P/J541-6 • P/J413-B1 <=> P/J541-7 • P/J413-B2 <=> P/J541-8 • P/J413-B3 <=> P/J541-9 • P/J413-B4 <=> P/J541-10 • P/J413-B5 <=> P/J541-11 • P/J413-B6 <=> P/J541-12 Are these conductive? Go to Step 4. Repair the wiring. 4 Check for +5 V to the Tray 4-5 PWB. Is there +5 V across P/J413-A5 (+) <=> ground? Replace the Tray 4-5 PWB. Replace the Engine Control Board.