Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H7-8 — Xerox Phaser 5400

Code: H7-8

Description: Incorrect Tray 4-5 Installed - H7-8 Type Error The 1000-Sheet Feeder is not recognized as the proper type for the printer.
Causes: • Tray 4-5 PWB • Engine Control Board
Remedy: 1 Check the Tray 4-5 installation. Disconnect the 1000-Sheet Feeder from the Printer and reconnect it. Does the error still occur? Go to Step 2. Problem solved. 2 Check the settings of the Dip Switch SW1 on the Tray 4-5 PWB. • SW1-1 is in the Left position • SW1-2 is in the Right position • SW1-3 is in the Right position • SW1-4 is in the Left position Are the switches set correctly? Go to Step 3. Correct the Switch settings. If problem persists, go to Step 3. 3 Check Tray 4-5 PWB connections. Is P/J541 connected? Go to Step 4. Connect P/J541. 4 Check continuity between the Tray 4-5 PWB and the Engine Control Board. 1. Disconnect P/J413 and P/J541. 2. Check for continuity at the following: • P/J413-A1 <=> P/J541-1 • P/J413-A2<=> P/J541-2 • P/J413-A3 <=> P/J541-3 • P/J413-A4 <=> P/J541-4 • P/J413-A5 <=> P/J541-5 • P/J413-A6 <=> P/J541-6 • P/J413-B1 <=> P/J541-7 • P/J413-B2 <=> P/J541-8 • P/J413-B3 <=> P/J541-9 • P/J413-B4 <=> P/J541-10 • P/J413-B5 <=> P/J541-11 • P/J413-B6 <=> P/J541-12 Are these conductive? Go to Step 5. Repair the wiring. 5 Check for +5 V to the Tray 4-5 PWB. Is there +5 V across P/J541-5 (+) <=> ground? Replace the Tray 4-5 PWB. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie