Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi J3-1 — Xerox Phaser 5400

Code: J3-1

Description: No Drum Cartridge - J3-1 Drum Not Installed The Drum Cartridge is not detected by the Drum Cartridge Detect Switch.
Causes: • Drum Cartridge • Drum Cartridge Detect Switch • Engine Control Board
Remedy: 1 Check the Drum Cartridge installation. Was the Drum Cartridge replaced? Go to Step 2. Replace the Drum Cartridge. If the error persists, go to Step 2. 2 Test the Drum Cartridge Detect Switch. Run the Service Diagnostics Detect DRUM Cartridge Switch test. Does the switch status change when the Drum Cartridge is moved in and out? Replace the Engine Control Board. Go to Step 3. 3 Check the Drum Cartridge Detect Switch connection. Is P/J404 connected? Go to Step 4. Connect P/J404. 4 Check Drum Cartridge Detect Switch continuity. Is there continuity between P/J404-1 <=> P/ J404-3 when the Drum Cartridge is installed? Go to Step 5. Repair the wiring. 5 Check for +5 V to the Drum Cartridge Detect Switch. Is there +5 V across P/J404-3 (+) <=> ground? Replace the Drum Cartridge Detect Switch. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie