Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi J7-1, J7-2 — Xerox Phaser 5400

Code: J7-1, J7-2

Description: Drum Cartridge Failure - J7-n Comm/NVRAM/Type Error The Drum Cartridge CRUM failed to communicate with the Engine Control Board. • Drum Cartridge Failure - J7-1 DRUM Comm Error • Drum Cartridge Failure - J7-2 DRUM NVRAM Error
Causes: • Drum Cartridge • Drum Cartridge CRUM PWB • Engine Control Board
Remedy: 1 Check the Drum Cartridge installation. Was the Drum Cartridge replaced? Go to Step 2. Replace the Drum Cartridge. If the error persists, go to Step 2. 2 Check the Drum Cartridge CRUM PWB. Is the Drum Cartridge CRUM PWB installed correctly? Go to Step 3. Correct the installation. 3 Check the Drum Cartridge CRUM PWB connection. Are P126 and P/J419 connected? Go to Step 4. Connect P/126 and P/J419. 4 Check continuity between the Drum Cartridge CRUM PWB and Engine Control Board. 1. Disconnect P/126 and P/J419. 2. Check for continuity at the following: • P126-6 <=> P/J419-1 • P126-5 <=> P/J419-2 • P126-4 <=> P/J419-3 • P126-3 <=> P/J419-4 • P126-2 <=> P/J419-5 Are these conductive? Go to Step 5. Repair the wiring. 5 Check +5 V to Drum Cartridge CRUM PWB. Is there +5 V across P126-6 (+) <=> ground? Replace the Drum Cartridge CRUM PWB. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie