Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi J8-3 — Xerox Phaser 5400

Code: J8-3

Description: Replace Incorrect Toner Cartridge - J8-3 Toner Cartridge Type Mismatch. • Replace Incorrect Toner Cartridge - J8-3 Toner Cart. type mismatch • Non-Xerox Toner Cartridge
Causes: • Toner Cartridge • Toner Cartridge CRUM PWB • Engine Control Board
Remedy: 1 Check the Toner Cartridge installation. Was a Xerox Toner Cartridge replaced? Go to Step 2. Replace with a Xerox Toner Cartridge. If the error persists, go to Step 2. 2 Check the Toner Cartridge CRUM PWB installation. Is the Toner Cartridge CRUM PWB installed correctly? Go to Step 3. Correct the installation. 3 Check the Toner Cartridge CRUM PWB connection. Are P127 and P/J419 connected? Go to Step 4. Connect P127 and P/J419. 4 Check continuity between the Toner CRUM PWB and Engine Control Board. 1. Disconnect P127 and P/J419. 2. Check for continuity at the following: • P127-6 <=> P/J419-6 • P127-5 <=> P/J419-7 • P127-4 <=> P/J419-8 • P127-3 <=> P/J419-9 • P127-2 <=> P/J419-10 Are these conductive? Go to Step 5. Repair the wiring. 5 Check +5 V to the Toner Cartridge CRUM PWB. Is there +5 V across P127-6 (+) <=> ground? Replace the Toner Cartridge CRUM PWB. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie