Code: U3-3
Description: Laser Unit Failure - U3-3 Laser Power The Laser Assembly has failed.
Causes: • Drum Cartridge • Laser Assembly • Engine Control Board
Remedy: 1 Check the Drum Cartridge installation. Is the Drum Cartridge installed properly? Go to Step 2. Correct the installation. 2 Check the Laser Assembly installation. Is the Laser Assembly installed properly? Go to Step 3. Correct the Laser Assembly. 3 Check the Laser Assembly connection. Are P/J140 and P/J406 connected? Go to Step 4. Connect the Laser. 4 Check the Laser Assembly connections. Are P/J130, P/J620 and P/J406 connected? Go to Step 5. Connect P/J130, P/J620 and P/ J406. 5 Check continuity between the Laser Assembly and the Engine Control Board. Is there continuity on each wire between P/ J140 <=> P/J406? Go to Step 6. Repair the wiring. 6 Check continuity between the Laser Assembly and the Engine Control Board. Is there continuity on each wire between P/ J130 <=> P/J406? Go to Step 7. Repair the wiring. 7 Check for +5 V to the Laser Assembly. Is there +5 V across P/J140-8 (+) <=> ground? Go to Step 8. Replace the Engine Control Board. 8 Check for +24 V to the Laser. Is there +24 V across P/J130-5 (+) <=> ground? Replace the Laser Assembly REP 5.10). Replace the Engine Control Board.