Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E1-6 — Xerox Phaser 5500

Code: E1-6

Description: Jam at A - E1-6 Regi Area Jam Paper remains at the Registration Sensor located behind Door A.
Causes: • Registration Sensor • Engine Control Board
Remedy: 1 Check paper position at Door A. Is paper touching the Registration Sensor? Remove the paper. Go to Step 2. 2 Test the Registration Sensor. 1. Open Door A. 2. Run the Service Diagnostics Registration Sensor test. Does the sensor change state? Replace the Engine Control Board. Go to Step 3. 3 Check the Registration Sensor connection. Are P/J104 and P/J403 connected? Go to Step 4. Connect the sensor. 4 Check continuity between the Registration Sensor and Engine Control Board. Is there continuity on each wire between P/ J104 <=> P/J403? Go to Step 5. Repair the wiring. 5 Check for +5 V at the Registration Sensor. Is there +5 V across the sensor connector’s P/J104-1 <=> ground? Replace the Registration Sensor. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie