Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H3-7 — Xerox Phaser 5500

Code: H3-7

Description: Exit Unit Failure - H3-7 Exit Board Comm Failure Communications failure between the Engine Control Board and Exit PWB.
Causes: • Exit PWB • LVPS • Engine Control Board
Remedy: 1 Check the Exit PWB connection. Are P/J431 and P/J421 connected? Go to Step 2. Connect P/J431 and P/J421. 2 Check continuity between the Exit PWB and the Engine Control Board. 1. Disconnect P/J431 and P/J421. 2. Check for continuity at the following: • P/J431-1 <=> P/J421-8 • P/J431-2 <=> P/J421-7 • P/J431-3 <=> P/J421-6 • P/J431-4 <=> P/J421-5 • P/J431-5 <=> P/J421-4 • P/J431-6 <=> P/J421-3 • P/J431-7 <=> P/J421-2 • P/J431-8 <=> P/J421-1 Are these conductive? Go to Step 3. Repair the wiring. 3 Check the connection between the Exit PWB and the LVPS. Are P/J430 and P/J526 connected? Go to Step 4. Connect P/J430 and P/J526. 4 Check continuity between the Exit PWB and the LVPS. 1. Disconnect P/J430 and P/J526. 2. Check for continuity at the following: • P/J430-3 <=> P/J526-6 • P/J430-4 <=> P/J526-5 • P/J430-1 <=> P/J526-8 • P/J430-2 <=> P/J526-7 Are these conductive? Go to Step 5. Repair the wiring. 5 Check for +24 V to the Exit PWB. Is there +24 V across P/J430-1 (+) <=> ground? Replace the Exit PWB. Replace the LVPS.

← Xem tất cả mã lỗi Xerox Phaser 5500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie