Code: H4-3, H4-4
Description: Tray Paper Guide Does Not Match Size Menu • Tray Paper Guide Does Not Match Size Menu- H4-3 Tray 4 Paper Size Error • Tray Paper Guide Does Not Match Size Menu- H4-4 Tray 5 Paper Size Error
Causes: • Paper Size Switch • Tray Paper Guides • Tray 4-5 PWB • Engine Control Board
Remedy: 1 Check the Paper in the affected tray. Is paper loaded in the tray properly? Go to Step 2. Reload the paper. 2 Check the tray paper guides. Are the paper guides set correctly? Go to Step 3. Set the guides properly. 3 Check the Paper Size Switch for the affected tray. Is the switch installed correctly? Go to Step 4. Correct the installation. 4 Test the Paper Size Switch for the affected tray. Run the Service Diagnostics Size Sensor test for the affected tray. Does the sensor state change each time the loaded tray is moved in or out? Reconnect the connector of the Engine Control Board. Go to Step 5. 5 Check the Paper Size Switch connection. For Tray 4: Are P/J820 and P/J548 connected? For Tray 5: Are P/J824 and P/J548 connected? Go to Step 6. Connect the Paper Size Switch. 6 Check continuity between the affected Paper Size Switch and the Engine Control Board. For Tray 4: 1. Disconnect P/J820 and P/J548. 2. Check for continuity at the following: • P/J820-1 <=> P/J548-14 • P/J820-2 <=> P/J548-13 • P/J820-3 <=> P/J548-12 • P/J820-4 <=> P/J548-11 For Tray 5: 1. Disconnect P/J824 and P/J548. 2. Check for continuity at the following: • P/J824-1 <=> P/J548-7 • P/J824-2 <=> P/J548-6 • P/J824-3 <=> P/J548-5 • P/J824-4 <=> P/J548-4 Are these conductive? Go to Step 7. Repair the wiring. 7 Check for +3.3 V to the Paper Size Switch. For Tray 4: Is there +3.3 V across P/J820-1 (+) <=> ground? For Tray 5: Is there +3.3 V across P/J824-1 (+) <=> ground? Replace the Paper Size Switch for the affected tray. Replace the Engine Control Board. 8 Check the Tray 4-5 PWB connection. Are P/J413 and P/J541 connected? Go to Step 9. Connect P/J413 and P/541. 9 Check continuity between the Tray 4-5 PWB and the Engine Control Board. 1. Disconnect P/J541 and P/J413. 2. Check for continuity at the following: • P/J541-1 <=> P/J413-A1 • P/J541-2 <=> P/J413-A2 • P/J541-3 <=> P/J413-A3 • P/J541-4 <=> P/J413-A4 • P/J541-5 <=> P/J413-A5 • P/J541-6 <=> P/J413-A6 • P/J541-7 <=> P/J413-B1 • P/J541-8 <=> P/J413-B2 • P/J541-9 <=> P/J413-B3 • P/J541-10 <=> P/J413-B4 • P/J541-11 <=> P/J413-B5 • P/J541-12 <=> P/J413-B6 Are these conductive? 10 Check for +5 V to the Tray 4-5 PWB. Is there +5 V across P/J413-A5 (+) <=> ground? Replace the Tray 4-5 PWB. Replace the Engine Control Board.