Code: H5-4, H5-7, H5-8
Description: Finisher Board Failure NVM/Comm/Type Error • Finisher Board Failure - H5-4 NVM R/W Error • Finisher Failure - H5-7 MCU-Finisher Comm Error • Incorrect Finisher Installed - H5-8 Finisher Type Error
Causes: • Finisher Main PWB • Engine Control Board
Remedy: 1 Check the Finisher installation. Are the interface cables connected correctly? Go to Step 2. Reconnect the cables and got to Step 2. 2 Does the error occur when the power is cycled? Go to Step 3. Problem solved. 3 Check Finisher Main PWB connections. Are P/J8300 and P416 connected? Go to Step 4. Connect all connectors. Go to Step 4. 4 Check continuity between the Finisher Main PWB and the Engine Control Board. 1. Disconnect P/J8300 and P/J416. 2. Check for continuity at the following: • P/J8300-11 <=> P/J416-1 • P/J8300-10 <=> P/J416-2 • P/J8300-9 <=> P/J416-3 • P/J8300-8 <=> P/J416-4 • P/J8300-7 <=> P/J416-5 • P/J8300-6 <=> P/J416-6 • P/J8300-4 <=> P/J416-7 • P/J8300-3 <=> P/J416-8 • P/J8300-2 <=> P/J416-9 • P/J8300-1 <=> P/J416-10 • P/J8300-4 <=> P/J416-11 Are these conductive? Go to Step 5. Repair the wiring. 5 Check for +24 V to the Finisher Main PWB. Is there Replace the Finisher Main PWB. Replace the Engine Control Board.