Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H6-7 — Xerox Phaser 5500

Code: H6-7

Description: Tray 6 Control Board Failure - H6-7 HFC Comm Failure A communications error occurred between Tray 6 and the Engine Control Board.
Causes: • Tray 6 PWB • Engine Control Board
Remedy: 1 Check the Tray 6 installation. Is Tray 6 installed correctly? Go to Step 2. Correct the installation. If problem persists, go to Step 2. 2 Cycle printer power. Does the error still occur? Go to Step 3. Problem solved. 3 Check the Tray 6 PWB connections. Are P/J800A, P/J800B, P/J800 and P/J414 connected? Go to Step 4. Connect and go to Step 4. 4 Check continuity between the Tray 6 PWB and Engine Control Board. Check for continuity at the following: • P/J800A <=> P/J415 • P/J800B <=> P/J415 • P/J800 <=> P/J414 Are these conductive? Go to Step 5. Repair the wiring. 5 Disconnect all the connectors connected to the Tray 6 PWB and reconnect them. Cycle printer power. Does the error still occur? Replace the Tray 6 PWB. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie