Code: H7-8
Description: Incorrect Tray 4-5 Installed - H7-8 Type Error The 1000-Sheet Feeder is not recognized as the proper type for the printer.
Causes: • Tray 4-5 PWB • Engine Control Board
Remedy: 1 Check the Tray 4-5 installation. Disconnect the 1000-Sheet Feeder from the Printer and reconnect it. Does the error still occur? Go to Step 2. Problem solved. 2 Check the settings of the Dip Switch SW1 on the Tray 4-5 PWB. • SW1-1 is in the Left position • SW1-2 is in the Right position • SW1-3 is in the Right position • SW1-4 is in the Left position Are the switches set correctly? Go to Step 3. Correct the Switch settings. If problem persists, go to Step 3. 3 Check Tray 4-5 PWB connections. Is P/J541 connected? Go to Step 4. Connect P/J541. 4 Check continuity between the Tray 4-5 PWB and the Engine Control Board. 1. Disconnect P/J413 and P/J541. 2. Check for continuity at the following: • P/J413-A1 <=> P/J541-1 • P/J413-A2<=> P/J541-2 • P/J413-A3 <=> P/J541-3 • P/J413-A4 <=> P/J541-4 • P/J413-A5 <=> P/J541-5 • P/J413-A6 <=> P/J541-6 • P/J413-B1 <=> P/J541-7 • P/J413-B2 <=> P/J541-8 • P/J413-B3 <=> P/J541-9 • P/J413-B4 <=> P/J541-10 • P/J413-B5 <=> P/J541-11 • P/J413-B6 <=> P/J541-12 Are these conductive? Go to Step 5. Repair the wiring. 5 Check for +5 V to the Tray 4-5 PWB. Is there +5 V across P/J541-5 (+) <=> ground? Replace the Tray 4-5 PWB. Replace the Engine Control Board.