Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U0-1, U1-1 — Xerox Phaser 5500

Code: U0-1, U1-1

Description: Main Motor Failure The Main Motor stopped or did not start on time.
Causes: • Motor Assembly • Engine Control Board
Remedy: 1 Check the Motor Assembly installation. Remove the Upper Rear Cover . Is the Motor Assembly installed correctly? Go to Step 2. Correct the installation. 2 Test Motor Assembly operation.Run the Service Diagnostics Main Motor test. Does the motor run? Go to Step 6. Go to Step 3. 3 Check the Motor Assembly connection. Are P/J214 and P/J408 connected? Go to Step 4. Connect P/J214 and P/J408. 4 Check continuity between the Motor Assembly and Engine Control Board. Does each wire conduct between P/J214 <=> P/J408? Go to Step 5. Repair the wiring. 5 Check for +24 V to the Motor Assembly. Is there +24 V across P/J214-1/-2 (+) <=> ground? Replace the Motor Assembly. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie