Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U1-4 — Xerox Phaser 5500

Code: U1-4

Description: Drum Motor Failure - U1-4 Drum Motor Failure The Drum Cartridge drive motor failed.
Causes: • Drum Cartridge • Fuser • Motor Assembly • Engine Control Board
Remedy: 1 Check the Fuser installation. Is the Fuser installed properly? Go to Step 2. Correct the Fuser. 2 Check the Drum Cartridge installation. Is the Drum Cartridge installed properly? Go to Step 3. Correct the installation. 3 Test the Drum Motor. Run the Service Diagnostics Drum Motor test. Does the motor run? Go to Step 4. Verify motor installation. Go to Step 5. 4 Check the Motor Assembly installation. Remove the Upper Rear Cover. Is the Motor installed properly? Replace the Engine Control Board. Correct the installation. 5 Check Drum Motor rotation. Can the rotor be rotated by hand without excessive load? Go to Step 6. Verify installation. 6 Check the Motor Assembly connection. Are P/J214 and P/J408 connected? Go to Step 7. Connect the Motor. 7 Check continuity between the Motor Assembly and Engine Control Board. Is there continuity on each wire between P/ J214 <=> P/J408? Go to Step 8. Repair the wiring. 8 Check for +24 V to the Motor. Is there +24 V across P/J214-1/-2 (+) <=> ground? Replace the Motor Assembly. Replace the Engine Control Board.

← Xem tất cả mã lỗi Xerox Phaser 5500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie