Code: U5-1
Description: Toner Motor Failure - U5-1 Motor Rotation The Toner Dispense Motor failed to rotate.
Causes: • Toner Cartridge • Toner Dispense Assembly • Toner Dispense Motor • Engine Control Board
Remedy: 1 Check the Toner Cartridge installation. Reinstall the Toner Cartridge. Does it operate properly? Problem solved. Go to Step 2. 2 Check Toner Dispense Assembly rotation. Does the gear located at the lower part of the Toner Dispense Assembly rotate? Go to Step 3. Restore proper operation. 3 Check Toner Dispense Assembly clogging. Is the pipe located at the lower part of the Toner Dispense Assembly clogged? Go to Step 4. Clean the pipe. 4 Test Dispense Motor operation. Run the Service Diagnostics Dispense Motor test. Does the motor operate? Replace the Engine Control Board (page 8-89). Go to Step 5. 5 Check the Dispense Motor for connection. Are P/J216 and P/J420 connected? Go to Step 6. Connect P/J216 and P/J420. 6 Check continuity between the Dispense Motor and Engine Control Board. Is there continuity on each wire between P/ J216 <=> P/J420? Go to Step 7. Repair the wiring. 7 Check for +24 V at the Dispense Motor. Is there +24 V across P/J216-1 (+) <=> ground? Replace the Dispense Motor. Replace the Engine Control Board.