Code: 042-325
Description: Motor Error The Main Drive Assembly has failed.
Causes: • Main Drive Assembly, PL6.1.2 • Main Motor Harness, PL6.1.7 • MCU Board, PL7.2.2
Remedy: 1 Check the connections between the MCU Board P/J16 and the Main Drive Assembly P/J160. Are the connections secure? Go to step 3. Reconnect the connectors, then go to step 2. 2 Does the error persist when the power is turned off and on? Go to step 3. Complete. 3 Is the Main Drive Assembly installed correctly? Go to step 6. Reseat the Main Drive Assembly, then go to step 5. 4 Does the error persist when the power is turned off and on? Go to step 6. Complete. 5 Check the Main Drive harness continuity. Disconnect P/J16 from the MCU Board and P/J160 from the Main Drive Assembly to check continuity. Is the harness damaged? Repair the harness. Go to step 7. 6 Check the power to the Main Drive Assembly. Disconnect connector P/J16 on the MCU Board. Are the voltages across ground at P/J16-2 and P/J16-4 approximately +24 VDC when the Interlock Switch is closed? Replace the Main Drive Assembly. Replace the MCU Board.